PC Adapters - USB Sticks

A Z-Wave PC adapter enables home automation software running on a PC to interact with a Z-Wave network. PC-adapters either use the Universal System Bus (USB) or the RS 232 serial port. Depending on the software used the PC adapters usually act as static controller however there are USB adapter with built-in battery. They act as portable inclusion controller then. Via the PC-adapter PC software for home automation can control Z-Wave devices such as switches, dimmers or sensors and they can perform a broad range of functions such as time triggered events, scene selection and switching and much more.

	ViaSens 100 ViaSens 100 connects a PC to a Z-Wave network using the USB interface. The unit emulates a USB communication device (CDC Communications Device Class) and does not need any further device drivers. The operating system and the Z-Wave capable home automation software recognise the device as virtual serial interface. PC software communicates ...[more]

	HomePro Serial Adapter The ACT serial adapter connects a PC to a Z-Wave network using the RS-232 interface. It can therefore be used in virtually every operating system, which supports serial interfaces. PC software communicates with the device via this serial port using a serial API-protocol of Z-Wave, which is described in the document “Z-Wave ...[more]

	Wireless-USB-Data Interface CONNECT The Merten CONNECT USB adapter connects a PC to a Z-Wave network using the USB interface. The unit conveys the USB signals to a serial interface and does therefore need a device driver for this conversion function. The operating system and the Z-Wave capable home automation software recognise the device as virtual serial interface. PC software ...[more]

	USB Adapter with Battery The Aeon Labs USB Adapter connects a PC to a Z-Wave network using the USB interface. The unit conveys the USB signals to a serial interface. For this conversion function a device driver is needed. The operating system and the Z-Wave capable home automation software recognize the device as virtual serial interface. PC software communicates with ...[more]

	Serial Adapter Board f�r Z-Wave The ZME_SERIAL is a little daughter board that connects a serial interface to the Wireless Z-Wave networks. The interface to the host is done by a 5x1 jumper connector that can be used in normal position and upside down. The pinout is (3.3V, TXD, RXD,GND, NC). The connection to the antenna is done using a reverse pigtail connector. The module ...[more]

	Vision USB Stick The Vision USB-Stick is a Z-Wave USB dongle. When attached to a host processor, it becomes a Z-Wave communication device, which exposes the Zensys API (SerialAPI) through integrated USB. The primary function of the device is to allow a host processor to control up to 232 Z-Wave devices using the Z-Wave technology protocol. Within the Z-Wave wireless ...[more]

	RaZberry The RaZberry turns every Raspberry PI into a Z-Wave Home Automation Gateway. The bundle of hardware and precompiled Z-Wave wireless network management software waits to be completed by your own user interface running in a web browser or a mobile phone. The Z-Wave software offers an easy to understand and easy ...[more]

	Z-Wave USB StickC The Z-Wave.Me Z-StickC connects a PC platform with USB interface to the wireless Z- Wave network. The interface to the Z-Wave network is a standard Z-Wave transceiver module ZM3102 implementing a serial control protocol. The USB stick connects this serial interface to the PC platform. Once the USB stick is connected to the PC the OS of the PC will ...[more]

Z-Wave | Company | Products | Contact | Impressum